ECUMASTER Plug and Play adapter for the Volkswagen 1.8T BAM allows for plug and play installation of the EMU Classic standalone ECU. All ECUs are sold separately. What's in the box PNP Adapter for Volkswagen 1.8T BAM engine            ...

ECUMASTER Plug and Play adapter for the Mk4 Volkswagen Golf R32 VR6 with BFH engine allows for plug and play installation of the EMU Black standalone ECU. All ECUs are sold separately. What's in the box Golf R32 to EMU Black plug and...

The Wheel Speed To CAN device is designed to measure frequency-type signals from 4 separate sensors and send that data over CAN BUS. The module can measure signals from different types of sensors, or standard digital signals. Thanks to differential...

ECUMASTER Plug and Play adapter for the Volkswagen 1.8T BAM allows for plug and play installation of the EMU Black standalone ECU. All ECUs are sold separately. What's in the box PNP Adapter for Volkswagen 1.8T BAM enginePicture shown is for illustration purpose only. Actual...

ECUMASTER Plug and Play adapter for the Nissan S15 SR20DET (64 terminal ECU header) allows for plug and play installation of the EMU and EMU CLASSIC standalone ECU. All ECUs are sold separately. Technical note on the S15 64 pin models:This adapter...

ECUMASTER Plug and Play adapter for the Nissan S15 SR20DET (64 terminal ECU header) allows for plug and play installation of the EMU Black. All ECUs are sold separately. Technical note on the S15 64 pin models:This adapter is designed for J4/J5/S15 64 pin ECU...

ECUMASTER Plug and Play adapter for the Nissan RB26 allows for plug and play installation of the EMU Black standalone ECU. All ECUs are sold separately. What's in the box Nissan RB26 R34 EMU Black PNP Adapter Installation Instructions BASE MAPS...

WHP Plug and Play adapter for the Nissan 350Z allows for plug and play installation of the EMU Black standalone ECU. All ECUs are sold separately. This adapter retains all factory functionality except cruise control (which may be added in a later firmware...

LAMBDA to CAN Ecumaster Lambda to CAN controller is a compact device used to control a Bosch LSU 4.9 wideband oxygen sensor and transmit the lambda reading via CAN-BUS. Two programmable 0-5V analog signal lines are available, along with the...

*This listing is for just the plug and play adapter, ECU sold separately* ECUMASTER Plug and Play adapter for the JZX100 VVTi 1JZ with Manual Transmission (4 rows of pins on the ECU connector) allows for plug and play installation of the...

  Includes: One Sticker Sheet 12 Clear CAN Keyboard Inserts

The EMU Black 2ZR EMU Black Plug and Play ECU suits the 220, 250, and 260 Cup models. The ECU comes with a USB cable and a connector and terminals for additional functions. This ECU is fully programmable, along with...

This module is dedicated to EMU CLASSIC and changes low side outputs (eg. AUX outputs) to high side.

The WHPFH1 is a sealed, pull to seat fuse holder that comes with terminals, a wire seal, fuse holder, water resistant cap with mounting tab, and a 30A ATO fuse. The WHPFH1 is an excellent choice for harsh environments, and...

The WHPFH2 is a sealed, pull to seat fuse holder that comes with terminals, a wire seal, fuse holder, water resistant cap with mounting tab, and a 30A ATO fuse. The WHPFH2 is an excellent choice for harsh environments, and...

Don't let garbage relays burn your car down! The WHPR40 is a sealed, push to seat 40A relay kit. The kit includes a 40A SPDT sealed relay, connector, terminals, seals, and TPA lock. Commonly available automotive relays suffer from poor...

This kit includes a 1/8" compact Air Temp Sensor, aluminum weld bung, connector, terminals and seals.   WHP Air Temperature Sensor Kits are perfect for vehicles using the EMU standalone that are not equipped from the factory with an intake...

ECUMASTER EMU 2JZGTE Plug and Play is designed for the 1993-1998 Toyota Supra with manual transmission, GE or GTE, or a manual transmission non-VVTi SC300. This plug and play adapter is also compatible with non-VVTi Aristo 2JZGTE engine harnesses so long as it is...

The Flying Lead Harness for the ECUMaster EMU is the perfect starting point for your custom ECUMaster EMU installation. Whether you have a unique engine combination or just want to start with brand new wiring, our 2.5 meter harness is...

The ECUMaster Drive By Wire Control module allows for the use of a DBW throttle with the ECUMaster EMU. The EMU Black has DBW control built in, so this product is only for use with the standard EMU. A full...

The ECUMaster CAN bus expansion module plugs into the 5 pin serial port on the standard EMU and adds the capability to communicate over CAN bus, as well as adding 4 analog inputs. CAN bus allows for communication with other...

EDL-1 adds logging functionality to the EMU or EMU Black (not compatible with the EMU CAN, only the EMU with 5 pin serial port). Equipped with both bluetooth capability and a port for an SD card, the EDL-1 allows you...

ECUMASTER EMU CLASSIC - We are excited to announce a new and improved version of our popular EMU engine control unit: the EMU Classic. Our goal at ECUMaster is to provide the best possible products at an affordable price. The...

Our product is dedicated for all Lotus S2 enthusiasts, this system is a great upgrade for your car because it gives you full control over your engine parameters without needing any modifications to the original wiring harness.The ECU comes unlocked with all functions...