ECUMASTER EMU BLACK STANDALONE ECU
ECUMASTER EMU BLACK is a universal engine control computer that manages the operation of spark-ignition engines, and is designed to work with the most advanced and complex currently available engines. It is the successor to our proven system, the ECUMaster EMU. Common applications...
$1,199.00
WHP Wideband Knock Sensor Kit - M12
WHP wideband knock sensor kits are designed to take advantage of the sophisticated knock detection circuits in many modern ECUs, such as the ECUMaster EMU. The knock processing chip in the EMU is designed to take advantage of wideband, or...
$85.00
PNP Adapter Extension
1 Meter (Approx. 3 Ft.) extension harness for any situation that may be improved with longer wire length. Each wire in this flying lead PnP adapter extension is pre-crimp with terminals on both ends. Will work with EMU Black and EMU Classic...
$49.00
ECUMaster Battery Isolator Club (M8)
BATTERY ISOLATOR New Product! The Club version of the battery isolator utilizes a Deutsch DTM connector for termination instead of the much more expensive Deutsch Autosport connector. This version retains the same features and specifications at a decreased cost vs...
$519.00
8 Position Rotary Switch
8 Position Rotary Switches can be used to control various ECU functions such as Traction Control and Boost Control settings. Installation is simple, just connect 5V supply, sensor ground, and the output signal. Rotary switches can be connected to any...
$39.00
02-05 LEXUS IS300 & 02-05 GS300 PNP FOR EMU BLACK
This plug and play adapter harness allows for the installation of an EMU Black in an 02-05 IS300 or an 02-05 GS300. This is a parallel harness, meaning that the original ECU is retained and controls the automatic transmission (if...
$849.00
WHP Flex Fuel Sensor Kit
WHP Flex Fuel Sensor Kits are designed for use with aftermarket ECUs capable of reading an ethanol content sensor. The use of a WHP Flex Fuel Sensor with the ECUMaster EMU allows for blending of fuel, ignition, engine start, and...
$139.00
WHP Flex Fuel Sensor Kit, -6 AN Fittings
WHP Flex Fuel Sensor Kits are designed for use with aftermarket ECUs capable of reading an ethanol content sensor. The use of a WHP Flex Fuel Sensor with the ECUMaster EMU allows for blending of fuel, ignition, engine start, and...
$164.00
WHP Wideband Oxygen Sensor Kit- Bosch 4.2 with harness
WHP Wideband Oxygen Sensor Kits allow you to use the on-board wideband oxygen sensor controller in the ECUMaster EMU. Accurate information is vital to engine performance and tuning, and the Bosch LSU 4.2 wideband oxygen sensor is a reliable and...
$139.00
WHP EGT Probe- Type K Thermocouple
WHP EGT Sensors allow you to use the EGT inputs on the EMU and EMU Black to measure exhaust gas temperature. WHP Sensors are a stainless body Type K thermocouple and come with a male 1/8 NPT compression fitting and...
$65.00
Sale
WHPBD1 Basic Dash Display
  The WHPBD1 Basic Dash Display is an exciting new product that is an affordable display option. While we would love to sell every customer an ADU5 or ADU7, there are many customers whose budgets and requirements don't need a...
$399.00 $349.00
WHP Wideband Oxygen Sensor Kit- Bosch 4.2 with connector and terminals
WHP Wideband Oxygen Sensor Kits allow you to use the on-board wideband oxygen sensor controller in the ECUMaster EMU. Accurate information is vital to engine performance and tuning, and the Bosch LSU 4.2 wideband oxygen sensor is a reliable and...
$119.00
WHP Wideband Oxygen Sensor Kit- Bosch 4.9 with connector and terminals
WHP Wideband Oxygen Sensor Kits allow you to use the on-board wideband oxygen sensor controller in the ECUMaster EMU Black. Accurate information is vital to engine performance and tuning, and the Bosch LSU 4.9 wideband oxygen sensor is a reliable...
$119.00
WHP Wideband Oxygen Sensor Kit- Bosch 4.9 with harness
WHP Wideband Oxygen Sensor Kits allow you to use the on-board wideband oxygen sensor controller in the ECUMaster EMU Black. Accurate information is vital to engine performance and tuning, and the Bosch LSU 4.9 wideband oxygen sensor is a reliable...
$139.00
WHP IGN-1A Ignition Coil
IGN-1A ignition coils are well known for their incredible spark energy and often cost less than other lesser commonly used ignition coils. This smart coil is capable of being driven by a 5V signal, which means no external ignitor is...
$75.00
WHP Wideband Knock Sensor Kit - M10
WHP wideband knock sensor kits are designed to take advantage of the sophisticated knock detection circuits in many modern ECUs, such as the ECUMaster EMU. The knock processing chip in the EMU is designed to take advantage of wideband, or...
$85.00
WHP Wideband Knock Sensor Kit - M8
WHP wideband knock sensor kits are designed to take advantage of the sophisticated knock detection circuits in many modern ECUs, such as the ECUMaster EMU. The knock processing chip in the EMU is designed to take advantage of wideband, or...
$85.00
WHP 10 BAR PRESSURE SENSOR, 1/8 NPT
WHP 10 BAR PRESSURE SENSORS are ideally suited for automotive applications such as oil and fuel pressure. 7 bar sensors are generally used for fuel pressure, and 10 bar sensors are recommended for oil pressure as cold oil pressure can...
$114.00
WHP 7 BAR FUEL OR OIL PRESSURE SENSOR, 1/8 NPT
WHP 7 BAR PRESSURE SENSORS are ideally suited for automotive applications such as oil and fuel pressure. 7 bar sensors are generally used for fuel pressure, and 10 bar sensors are recommended for oil pressure as cold oil pressure can...
$114.00
WHP 7 BAR MAP SENSOR, 1/8 NPT - WHP7M
WHP 7 BAR MAP SENSORS are ideally suited for high boost MAP sensor applications or exhaust manifold absolute pressure measurement, providing resolution up to 87 PSI of boost pressure (approx. 100 PSI absolute). WHP pressure sensors are the perfect companion...
$135.00
WHP 4 BAR MAP SENSOR, 1/8 NPT
WHP 4 BAR MAP SENSORS are ideally suited for high boost MAP sensor applications, providing resolution up to nearly 45 PSI of boost pressure. WHP pressure sensors are the perfect companion to any ECU. WHP sensors are built to custom...
$135.00
WHP 3.5 BAR MAP SENSOR, 1/8 NPT
WHP 3.5 BAR MAP SENSORS are ideally suited for high boost MAP sensor applications, providing resolution up to 35 PSI of boost pressure. WHP pressure sensors are the perfect companion to any ECU. WHP sensors are built to custom specifications...
$135.00
WHP Boost Control Solenoid Kit
WHP boost control solenoid kits can be used with either the EMU standalone engine control unit or the DET3 piggyback engine control unit. WHP boost control solenoid kits are based around a genuine MAC valve built to custom WHP specifications...
$114.00
WHP Air Temperature Sensor Kit, 3/8 NPT
WHP Air Temperature Sensor Kits are perfect for vehicles using the EMU standalone that are not equipped from the factory with an intake air temperature sensor or have removed the factory MAF and need an air temperature sensor to replace...
$49.00
You have successfully subscribed!