4-Position CAN Keyboard
$349.00
Wheel Speed to CAN Module
In stock
$399.00
customers are viewing this product
The Wheel Speed To CAN device is designed to measure frequency-type signals from 4 separate sensors and send that data over CAN BUS. The module can measure signals from different types of sensors, or standard digital signals. Thanks to differential inputs and configurable pull up/down resistors, sensors can be connected directly to the device or parallel to a working ABS system.
The Wheel Speed to CAN device must be programmed using a CAN interface. The ECUMaster USB to CAN, Kvaser, or Peak PCAN may be used.
What's in the box?
- Wheel Speed to CAN Module
- 12 Position connector with terminals
PRODUCT MANUAL IS LOCATED HERE.
ECUMASTER ADU7 ADVANCED DISPLAY UNIT Rev.2, IP65
ADU7 Advanced Display Unit with Logging We are proud to announce the new ECUMASTER Racing Dash family of products. We designed the ADU5 and ADU7 in response to market demand for a cost-effective dash display with logging capabilities. Our specific...
from $1,699.00
ECUMASTER ADU5 ADVANCED DISPLAY UNIT Rev.2, IP65
ADU5 Advanced Display Unit with Logging We are proud to announce the new ECUMASTER Racing Dash family of products. We designed the ADU5 and ADU7 in response to market demand for a cost-effective dash display with logging capabilities. Our specific...
from $1,429.00
ECUMASTER ADU7 AutoSport ADVANCED DISPLAY UNIT
ADU7 AutoSport Advanced Display Unit with Logging The ADU7 AutoSport Display is identical in spec to the regular ADU7, but features a 37 position AutoSport connector instead of the AMP connector on the original ADU7. AutoSport connectors are used in...
from $1,999.00
WHPBD1 Basic Dash Display
The WHPBD1 Basic Dash Display is an exciting new product that is an affordable display option. While we would love to sell every customer an ADU5 or ADU7, there are many customers whose budgets and requirements don't need a...
$399.00
$349.00
BTI CAN Gauge for ECUMaster EMU, 52mm
The BTI CAN gauge is an elegant solution for viewing real-time data from the ECUMaster EMU. The BTI gauge is directly compatible with the CAN version of the EMU (6 pins on the extension port) and can be used with...
$375.00
ECUMaster Digital Gear Indicator
The digital gear indicator is designed to work with a stock or aftermarketECU to display the current gear with an optional shift light.Gear calculations are made based on vehicle speed and engine RPMvia OBD2 or CAN, or using a gearbox...
$399.00
USB to CAN Module
USB to CAN Module is used to communicate between your PC and the ECUMaster PMU. Multiple devices can be connected via CAN, and a single connection can be used to communicate with all devices at once (for example: race vehicles using...
$155.00
ECUMaster GPS to CAN with IMU - Autosport
GPS to CAN is a device designed to provide position information over CAN BUS. The module uses a combination of different navigation systems (GPS, GLONASS, BeiDou, Galileo) as well as an internal IMU (Inertial Measurement Unit). Position, acceleration, and yaw...
$549.00